Wi-Fi Router D-Link 2750U Dump Backup: A Complete Guide

by | Feb 10, 2025 | Download Wi-Fi Router Software Update

Software Update Download

Wi-Fi Router D-Link 2750U Dump Backup

The D-Link DSL-2750U is a popular ADSL2+ WiFi router known for its reliability and affordability. Whether you’re a tech enthusiast or an IT professional, creating a backup (dump) of your router’s firmware can be crucial for recovery, modification, or troubleshooting. This guide will walk you through the process of dumping (backing up) the firmware from your D-Link 2750U router.

TP.VST59S.PB702 Backup Dump
S.NO. Board/Description Download Link
1 WiFi Router D-Link 2750U Dump Backup File.

Why Backup Your D-Link 2750U Router?

Backing up your router’s firmware allows you to:
✅ Restore the original firmware in case of corruption.
✅ Modify and experiment with custom settings safely.
✅ Recover from a failed update.
✅ Save time in case you need to set up a new router with the same configurations.

Methods to Backup D-Link 2750U Firmware Dump

There are multiple ways to extract a dump from your router, but the most common approaches include:

  1. Using Telnet or SSH
  2. Using a Web Interface (if available)
  3. Using a Serial Connection (Advanced Users)

Method 1: Backup Using Telnet (Easiest Method)

The D-Link 2750U allows remote access via Telnet, which can be used to extract firmware.

Steps:

  1. Enable Telnet on Your PC
    • On Windows, open Command Prompt (cmd) and type: pkgmgr /iu:"TelnetClient"
    • On Linux/macOS, Telnet is pre-installed.
  2. Connect to the Router via Telnet
    • Open Command Prompt (Windows) or Terminal (Linux/macOS).
    • Type: telnet 192.168.1.1
    • Enter the default router credentials (Username: admin, Password: admin or your custom password).
  3. Find and Dump the Firmware
    • Run the following command to locate the firmware file: cat /proc/mtd
    • This will display partition information. Look for mtd0 or mtdblock0 (which usually stores the firmware).
    • Extract the firmware to a USB or PC using: dd if=/dev/mtd0 of=/tmp/firmware_backup.bin
    • Use FTP or SCP to copy the file to your PC for safekeeping.

Method 2: Backup via Web Interface

Some D-Link routers allow configuration backups via the web UI, but not full firmware dumps.

Steps:

  1. Log in to Your Router
    • Open a web browser and go to http://192.168.1.1.
    • Log in using admin as the username and your password.
  2. Find the Backup Option
    • Navigate to Maintenance → Firmware Upgrade.
    • Click on Backup Settings (this will only save configuration settings, not full firmware).
  3. Download and Save the File
    • Save the backup file to your PC.
    • This file can be restored in case of configuration issues.

Method 3: Backup Using Serial Connection (Advanced Users)

For deeper access, you can use a UART serial connection to directly extract the firmware.

Requirements:

  • USB-to-TTL adapter (like CP2102 or FTDI).
  • Terminal software (PuTTY, Tera Term).

Steps:

  1. Open the Router Case
    • Locate the serial port pins (TX, RX, GND) on the router’s board.
  2. Connect the USB-TTL Adapter
    • Connect the adapter to the router’s serial pins.
    • Open the terminal software and set the baud rate to 115200.
  3. Dump the Firmware
    • Use commands like cat /dev/mtd0 or tftpboot to transfer the dump.

Restoring the Firmware Dump

If you ever need to restore your backup:

  1. Reconnect via Telnet/SSH or Serial Connection.
  2. Use the command: dd if=/tmp/firmware_backup.bin of=/dev/mtd0
  3. Reboot the router using: reboot

Conclusion

Creating a firmware dump of your D-Link DSL-2750U router is a valuable process for backup, troubleshooting, and customization. Whether using Telnet, web UI, or a serial connection, having a firmware backup ensures you’re prepared for any issues that may arise.

Would you like help with custom firmware or recovery methods? Let me know! 🚀